GPC® 153

General Purpose Controller, Zilog 84C15

GPC® 153 English Tech. Manual PDF format.

Ver. 5.10 - Rel. 11 May 2000.

GPC® 153: Optional plastic mount for connection to Omega rails

The GPC® 153 is a powerful control Low-Cost module capable of operationg in stand-alone mode or as an intelligent peripheral, and/or remoted, in a wider telecontrol or aquisition network. The GPC® 153 module is secured in a plastic mount for connection to Omega rails DIN 46277-1 and DIN 46277-2, thereby dispensing with the need of rack and allowing a less costly mounting direct to the electrical control panel. Programming and exploiting the resources of this module is extremely easy thanks to the help of the stout GDOS Romated Operative System. This latter supports high level languages such as BASIC, PASCAL, C Compilers and so on.; it makes available the memory resources as they should be ROM/RAM-Disk allowing an immediate use of this devices at high level. This module linked to the MCI-64 and FGDOS manages PCMCIA cards of RAM cards and, directly, the on-board Peripherals as serial EEPROM. In addition to that the GPC® 153 allows a direct management of LCD or Fluorescent Displays and matrix keyboard. For an immediate use of this command, KDL-224 boards are available, or if you need a finished object, there is the Operator Panel QTP 16P or QTP 24P. (See the Application Note). This Operator Panel, offered in the open frame version, bears the same aesthetic as QTP 24, but, as the local intelligence is not furnished, it is driven directly by GPC® 153, allowing a notable cost reduction. The FGDOS affords truly notable debug facilities, and allows to program directly on board a FLASH with the user program. The GPC® 153 is equipped with a series of standard Abaco® connectors allowing immediate use of the many BLOCK I/O modules available, or enabling a simple and inexpensive means of connections to equipment interfaces made by the user or by third parties.

Abaco® I/O BUS connector allows to drive directly ZBR 84, ZBR 168, ZBR 246, ZBR 324, ZBT 84, ZBT 168, ZBT 246, ZBT 324, and through ABB 03, ABB 05 it is possible to manage all the peripheral cards available on Abaco® BUS.

• 100x149 size, Intelligent module of the Abaco® BLOCK 3 series
• Optional plastic mount for connection to DIN 46277-1 and DIN 46277-2 rails
• Standard Z84C15 CPU having a 20 MHz quartz
• Up to 512K of EPROM or FLASH and up to 512K of RAM. Through FGDOS the memory that exceed 64K is managed as RAM/ROM Disk. It is possible deleting and re-programming the on-borad FLASH, automatically, with the user programm.
• Back-up circuitery for RAM through internal and External LITHIUM battery
• Real-Time-Clock with Lithium battery having the possibility to generate INT
• Serial EEPROM up to 8KBytes
• A/D Converter Multi Range section having 8 lines at 12 Bits, 6 µs, Track-Hold, 5MHz Bandwith, 100Ksps. Settable full scale: ±10V, ±5V, +10V, +5V or 0÷20mA or 4÷20mA
• 16 TTL I/O lines software resettable at bit level managed by the internal PIO
• 2 status LEDs and circuitery for active BUZZER
• 1 software readable 6-ways Dip Switch
• Jumper for RUN/DEBUG Mode
• 2 CTC channels at user disposal havinf the possibility of impulses counting
• 2 serial lines in RS232, one configurable in RS422,RS485 or Current Loop
• Double Baud Rate generator,settable by software, up to 115.200 KBaud
• Watch-dog circuitery, hardware switching-off, with status LED
• 26 pins expansion connector for Abaco® I/O BUS
• 1 standard 20 pins Abaco® I/O Connectors
• 1 standard 20 pins Abaco® A/D Conn.
• Low Power function in Halt Mode, Idle Mode, STOP Mode
• Optional Built-in power supply or external 5Vdc, 140mA power supply
• On-board protection aganist voltage peaks by TransZorb
• Wide range of developement software such as: Remote-Symbolic-Debugger, Macro Assembler, GET-80, BASIC Compiler, NoICE, C Compiler, DDS, HTC-80, LISP, NSB8, CBZ-80, PASCAL, CMX-RTX, etc. No development system required in order to operate; for example, the FGDOS package and a connection to any PC is sufficient.

Mounting on DIN Rails (ZBR-246 + GPC®-883)

A C C E S S O R I E S
	CCR Plug 9 Communication Cable RS 232 - Plug Communication cable RS 232 witch DB9 connector and 6 pin RJ12.
	CCR Plug 25 Communication Cable RS 232 - Plug Communication cable RS 232 witch DB25 connector and 6 pin RJ12.
	Option,LITIO LITHIUM Battery with cable and conector
	WM3 - WM4 Housing for DIN Omega Rail Cards, 3 Type, or 4 Type.

Data Sheet GPC® 153, Rel. 96.9

Home Cards Categorical Index CPU Table