GPC® 323 English Tech.
Manual PDF format.
GPC® 323 English Tech.
Manual PDF format.
Ver 5.30 - Rel. 20 February 2002.
GPC® 323 English Errata
Corrige PDF format.
Ver 5.31 - Rel. 06 June 2008.
GPC® 323: Optional plastic mount for connection to Omega rails
The GPC® 323 is a powerful control Low-Cost module capable of operationg in stand-alone mode or as an intelligent peripheral, and/or remoted, in a wider telecontrol or aquisition network. The GPC® 323 module is secured in a plastic mount for connection to Omega rails DIN 46277-1 and DIN 46277-2, thereby dispensing with the need of rack and allowing a less costly mounting direct to the electrical control panel. The most interesting characteristic of GPC® 323 module is that it can be equipped with a wide range of µP. It is in fact possible to get it by the standard 80C32; by the fast DALLAS 80C320, by the new ATMEL 89C8252. The characteristics of the GPC® 323 module remain basically the same, but its performance changes according to the built-in µP. The current availability of the software developement tools do not cover all the possible combinations, and the current description refers to 80C32 and DALLAS 320 versions. A selection of software developement Tools can be obtained, allowing the use of the module as a system for its own developement, both in Assembler and in other evoluted languages. Noteworthy among these are the developement Tools as the Compilators C, the FORTH and the handy BASIC 323.The latter is compatible with the widespread MCS® BASIC-52 of INTEL to which have been added new commands. Noteworthy among the new ones, are the ones regarding the A/D, I2C-BUS, RTC, Serial EEPROM, direct managing of Display LCD or Fluorescent and of a Matrix Keyboard etc. For an immediate use of this new command, KDL-224 boards are available, or if you need a finished object, there is the Operator Panel QTP 16P or QTP 24P. (See the Application Note). This Operator Panel, offered in the open frame version, bears the same aesthetic as QTP 24, but, as the local intelligence is not furnished, it is driven directly by GPC® 323, allowing a notable cost reduction. The BASIC 323 affords truly notable debug facilities, and allows to program directly on board a EEPROM with the user program. To speed the applicative system, or to make it unreadable to intrusive eyes, the Compilator BASIC BXC51, provided with libraries that accept as source what has been generated and debugged with BASIC 322, is available. The GPC® 323 is equipped with a series of standard Abaco® connectors allowing immediate use of the many BLOCK I/O modules available, or enabling a simple and inexpensive means of connections to equipment interfaces made by the user or by third parties. Abaco® I/O BUS connector allows to drive directly ZBR 84, ZBR 168, ZBR 246, ZBR 324, ZBT 84, ZBT 168, ZBT 246, ZBT 324, and through ABB 03, ABB 05 it is possible to manage all the peripheral cards available on Abaco® BUS.
Mounting on DIN Rails (ZBR-246 + GPC®-883)
|
A C C E S S O R I E S |
|
|
|
Communication Cable RS 232 - Plug Communication cable RS 232 witch DB9 connector and 6 pin RJ12. |
|
|
Communication Cable RS 232 - Plug Communication cable RS 232 witch DB25 connector and 6 pin RJ12. |
|
|
LITHIUM Battery with cable and conector |
|
|
Housing for DIN Omega Rail Cards, 3 Type, or 4 Type. |
BASCOM-8051© is a Windows BASIC COMPILER for the 8051 family It is designed to run on W95/NT and has all the features of BASCOM LT. In addition it has full support for arrays and the single floating point type.
µ C / 5 1
ANSI C Compiler for 8051
Develop high quality software for any 8051 in ANSI
C. µC/51
comes with an incredible optimizing compiler, you can even write
software in ANSI C on 8051's with 1kB of
code memory! µC/51 is absolutely complete: user friendly
multi file Editor, Compiler, Assembler, Downloader, Source
Level Debugger. You will not need anything else.
PASCAL 51
Pascal compiler for 8051
The Pascal 51 is a compiler capable to generate code for the I51 family of microcontrollers, that use almost all the instructions defined in Wirth's Pascal. Thanks to his integarted developmen environment it is really simple to use and offers advantages in hardware resources management, available in the microcontrollers. Moreover objects and precompiled units can be used too.
LadderWORK
The LadderWORK Integrated Development Enviroment (IDE)
The picture below, represents the apperance of the program LadderWORK on your computer. LadderWORK has an integrated enviroment feature, allowing you to draw schematics, compile programs and upload code to PLC always working on the same window. The integrated enviroments are composed by several parts described below.
Page up-dated at June 06, 2008
