GMM 518 Zero possible
applications
- Integrated system that can be used directly on the board
developed by the user a macro component.
- Smart intelligent nodes with local functionalities as PID
algorithms for controlling temperatures, motors, valves, etc.
- Teleacquisition and telecontrol on medium and low distances.
- Home automation: lights turning ON/OFF, heating and cooling
systems control, supervision of electric devices, security and
acces control systems.
- Car automation: lights turning ON/OFF, heating and cooling
systems control, supervision of electric devices, anti-teft and
acces control systems, functionality checks.
- Didactics: GMM 518 Zero offers a very low cost to
learn 8051 Core, we have many starter kits options. For this
purpose it is likewise interesting the CAN
GMT or GMM TST3 support card.
- Whenever there is a short time to market: the user can see
a prototype or even a ready product in one week.
- Decentralized systems as robots, automation of production
line machines, big factory automations.
|
|
F E A T U R E
- Standard container with 28 pin male socket, dual in line,
100 mils pitch, 600 mils width.
- Very small dimension: 20,6 x 42,6 x 15 mm.
- Weight: 6,8 g.
- 4 layers printed circuit to obtain best noisy resistance
and best EMI performance.
- No external programmer is needed as GMM 518 Zero is
a grifo®
ISP (In
System Programming) Mini Module.
FLASH of Micro is Programmable and Erasable by using serial
line only.
- Micro FLASH programming or deleting can be managed
by using the FLIP program
available from ATMEL.
- Single power supply required +5Vdc 10-14mA (the current consumption
can change according with module connections).
- Availability of power saving setting as idle mode and power
down mode.
- Atmel T89C51CC03
microcontroller (8051 code compatibile) with 14,74 MHz crystal.
- Programmable machine speed at 12 or 6 clock cycle.
- 64K FLASH for code, 2K FLASH for boot loader, 2,2K RAM for
data, 2K EEPROM for data.
- 8 A/D converter channels with 10 bits resolution, 20 µsec
conversion time.
- A/D reference voltage available on connector.
- 14 interrupt sources with 4 priority levels.
- 3 Timers Counters up to 16 bits
- 5 PCA channels up to 16 bits with PWM, watch dog, compare,
capture, etc. functionality.
- Watch Dog section that protect the controlled system in any
operating condition.
- 24 digital I/O lines available on connector. Some of these
lines have multiple functions.
- Hardware serial line with programmable Baud Rate up to 115200
Baud, RS 232 buffered or at TTL level.
- Transceiver MAX3222, for RS 232 serial line, with ESD protection
up to ±15KV.
- CAN controller compatible
with 2.0 A and 2.0 B standards.
- Reset and power supply control circuit based on MAX825.
- 5 configuration jumpers, with 1 acquired by firmware.
- Status LED managed by firmware.
- Internal FLASH and EEPROM can be managed through In System
Programming, or when the module is already mounted, by using
the serial communication line.
- Freeware software for PC, that supports the ISP programmation
to dowload the generated code, inside on board FLASH.
- Wide range of development tools as: Assembler (MCA51); C
compiler (µC/51, HTC51, SYS51CW, DDS Micro C51); BASIC
compiler (BASCOM 8051); PASCAL compiler (SYS51PW); etc.
- Long list of demo programs and use examples supplied under
source form, duly remarked, for the available development tools.
|
GMM 518 Zero English Tech. Manual PDF format. 
Home 
Cat. Index 
Es.
BAS. K51
Hobby